Natura 2000 is a coherent ecological network of special areas, designated under the Habitat and Birds EEC Directives, to assist in the maintenance of biodiversity in the European territory. It is now widely recognised that one of the most effective ways to maintain biodiversity is to preserve habitats in a favourable conservation status as required of Member States by the Habitat Directive. As a consequence, approaches are needed to define when habitats are of favourable conservation status and to assess the maintenance or the restoration of this condition. This could be partly achieved through the selection of appropriate indicators of favourable conservation status. Once such indicators have been identified and tested, they could be used for monitoring the impact of managing Natura 2000 sites, and could assist in achieving policy goals. Although many indicators have been proposed, particularly for forested habitats, few have been adequately field tested. Little research has been undertaken to identify indicators that are cost-effective, a key characteristic given that resources for habitat assessment and monitoring are often limited. Therefore, this research aims both to identify appropriate indicators to maintain favourable conservation status, and to evaluate their relative cost-effectiveness for two selected Natura 2000 sites: the Cansiglio Forest (North Italy) and the New Forest (South England). The following will highlight the results of the preliminary research.Natura 2000 is a coherent ecological network of special areas, designated under the Habitat and Birds EEC Directives, to assist in the maintenance of biodiversity in the European territory. It is now widely recognised that one of the most effective ways to maintain biodiversity is to preserve habitats in a favourable conservation status as required of Member States by the Habitat Directive. As a consequence, approaches are needed to define when habitats are of favourable conservation status and to assess the maintenance or the restoration of this condition. This could be partly achieved through the selection of appropriate indicators of favourable conservation status. Once such indicators have been identified and tested, they could be used for monitoring the impact of managing Natura 2000 sites, and could assist in achieving policy goals. Although many indicators have been proposed, particularly for forested habitats, few have been adequately field tested. Little research has been undertaken to identify indicators that are cost-effective, a key characteristic given that resources for habitat assessment and monitoring are often limited. Therefore, this research aims both to identify appropriate indicators to maintain favourable conservation status, and to evaluate their relative cost-effectiveness for two selected Natura 2000 sites: the Cansiglio Forest (North Italy) and the New Forest (South England). The following will highlight the results of the preliminary research.
Natura 2000 is a coherent ecological network of special areas selected to assist in the maintenance of biodiversity in the European territory. It is composed of two different kinds of sites: firstly, the special areas of conservation (SAC) designated under the Habitats Directive (Council Directive 92/43/EEC) on the conservation of natural habitats and of wild fauna and flora, and secondly the special protection areas (SPA) designated under the Birds Directive (Council Directive 79/409/EEC) for the conservation of wild birds. These two EEC directives define an integrated framework to identify, to maintain and to protect natural sites as a whole; they represent the European Union’s most concrete act towards the achievement of international biodiversity policy commitments, such as the Bern Convention 82/72/EEC and the Biodiversity Convention 93/626/EEC (
According to the Habitats Directive, Natura 2000 “shall enable the natural habitat types and the species habitats listed in Annex I and Annex II to be maintained or, where appropriate, restored to a favourable conservation status in their natural range” (Article 3). The conservation status will be taken as “favourable” when:
the natural range and areas the natural habitat types cover are stable or increasing;
the specific structure and functions which are necessary for the natural habitat types long-term maintenance exist and are likely to continue to exist for the foreseeable future;
the population dynamics data on the species concerned indicate that they are maintaining themselves on a long term basis as viable components of their natural habitats;
the natural ranges of the species are neither being reduced nor are likely to be reduced for the foreseeable future;
there is, and will probably continue to be, a sufficiently large habitat to maintain its population on a long term basis (Article 1).
To achieve the aim of the Habitat Directive,
establish the necessary conservation measures involving appropriate management plans specifically designed for the sites or integrated into other development plans, and appropriate statutory, administrative or contractual measures which correspond to the ecological requirements of the natural habitat types and the species present on the sites;
take appropriate steps to avoid, in the special areas of conservation, the deterioration of natural habitats as well as disturbance of the species for which the areas have been designated (Article 6).
Therefore, when management of a Natura 2000 site is required, it is fundamental to identify, evaluate and monitor the site over time, to ensure that natural habitat and species are being maintained in a favourable conservation status.
Criteria and indicators are widely used to evaluate and monitor conservation status, particularly for forested habitats at the landscape scale (
A number of different definitions of indicators have been proposed:
a complex situation’s synthesis,
measurable surrogates for environmental end points (
qualitative or quantitative statistic variables, representative of an environmental factor and related to a specific subject (
a parameter or a related parameter value that gives information about a phenomenon and for which meaning goes beyond the specific characteristics associated with the parameter value (
a complex or simple entity whose function is to indicate the state or the change of phenomena that are impossible to directly measure (
As it is expressed by
scientific and theoretical value;
sensitive to a wide range of stresses to provide an early warning of change;
distributed over a broad geographical area or otherwise widely applicable;
require easily collected and cost-effective data to implement them;
relevant to ecologically significant phenomenon;
easy to understand even by non-specialists (
As a single indicator with all these desirable properties has not yet been identified, a core set or suite of indicators is normally required.
Given all the above definitions of indicators and the requirements to confidently apply them, their relevance to managing and monitoring Natura 2000 sites should immediately be apparent, yet this issue has received relatively little previous attention from past researchers (
Little research has been undertaken to identify indicators that are cost-effective, a key characteristic given that resources for habitat assessment and monitoring are often limited (
The Natura 2000 site Cansiglio Forest covers 50.6 km2 in the North Italy Alpine biogeographic region (latitude 46°04’45” north, longitude 12°24’42” east). From 2001 it has been included on the Site of European Community Interest list according to the Habitat Directive and from 2003 it has been classified as a Special Protection Area according to the Bird Directive. IT3230077 is the Natura 2000 identification site code.
According to the European Community Commission’s III level classification applied in the CORINE Land Cover project, 34.4 % of the Cansiglio Forest’s area is represented by broadleaved woodland, 19.4 % is covered by plantation, 29.6 % is mixed woodland, 14 % is grassland and the remaining 2.6% is represented by new forest stands. According to the “Interpretation Manual of European Union Habitats” (
The Forest has been managed from a very long time in the past. The
As the Cansiglio forest covers 5060 hectares it was not possible to survey the whole area with the available human resources so monitoring methods were applied to a sample area. Some 30 units were surveyed. As mentioned above, this research focuses particularly on the local scale. Therefore, sampling units were defined according to forest management units as reported in
A preliminary selection was made deleting those units that were less than one hectare (ha) in size. The resulting 187 sampling assessment units are shown in Fig. 1. A second selection was made by randomly choosing 30 units from the above 187 using ArcGIS 8.3© Hawth’s Analysis Tools© 2002 Version 2.00 extension. The 30 selected sampling units covered 787 ha, equal to 15.6 % of the Natura 2000 site and representing 21.2 % of the total forested sampling units.
The New Forest Natura 2000 site covers 292.9 km2 and is located in the South England Atlantic biogeographic region (latitude 50°51’59” north, longitude 01°40’50” west). From 2004 it has been confirmed as a Site of European Community Interest according to the Habitat directive and from 2005 it has been designated as SCA. UK0012557 is the Natura 2000 identification site code (
The New Forest is mainly covered by woodland. More precisely 46 % of the entire surface is represented by broadleaved, mixed and yew woodland, 34% by heath and scrub, 7% by grassland and 3% by bogs. As it is reported in the Natura 2000 data form, the majority of the woodland is represented by 9120 Atlantic acidophilous beech forest with
The New Forest was set aside by William the Conqueror in 1079 to give sanctuary to deer and other animals, which were hunted by Royal parties. Trees were protected by Forest law as they provided food and shelter for the deer. As time passed, interest in the forests deer declined and the New Forest started to be managed for timber cultivation. Most coppices were established by enclosing existing woodlands to produce shoots suitable for fodder, firewood, and hurdle fences or for converting into charcoal. Later with increasing pressures to supply the growing Royal Navy, new areas were enclosed and planted with conifers to produce timber for shipbuilding. The first and second World Wars resulted in a very chaotic scene. Vast areas of broadleaves were planted with fast-growing conifers for the war effort, some others, were taken over by the military (
In 1945 the ownership changed hands from the Crown to the Minister of Agriculture and nature conservation started to play a more important role in the forest, exercising an even greater influence over its management. However, the Forestry Commission, which took over management from the Crown, continued to convert some inclosures from broadleaves to conifers and pressures from tourism began to rapidly increase. Today the New Forest is regarded as a site of national heritage and importance due to the conservation of its traditional character with the ancient and ornamental woodland being conserved (
As it was not possible to survey the whole area with the available human resources, monitoring methods were applied to a sample area of 30 units. When considering the sample units to investigate it was decided to use the Sites of Special Scientific Interest broadleaved, mixed and yew woodland units reported by the English Nature website (http:/www.english-nature.org.uk), which are used in current monitoring of the conservation status of the site.
A preliminary selection was made deleting those units less than one hectare in size. The resulting 142 sampling assessment units are shown in Fig. 2. A second selection was made by randomly choosing 30 units from these 142 using the ArcGIS 8.3© Hawth’s Analysis Tools© 2002 Version 2.00 extension. The 30 sampling units covered 2702 ha, equal to 9.2 % of the Natura 2000 site and representing 22.4 % of the total forested sampling units.
For the purpose of this research,
For each of the 30 selected units, a 50 by 50 m plot was created at a randomly selected location within the unit. The start point coincided with the south-west corner of the plot, and was located in the field using GPS, given the coordinates randomly generated by using ArcGIS 8.3© Hawth’s Analysis Tools© 2002 Version 2.00 extension.
The basis for selecting indicators to look for in each plot was provided by:
the existing interpretation of the total body of EU law (
initiatives to promote sustainable forest management and other processes such as the “Ministerial Conference for the Protection of forest in Europe” (MCPE), the “Indicators for monitoring and evaluation of forest biodiversity in Europe” project (BEAR) and the Italian “Monitoring of Forest Ecosystems” program (CONECOFOR) and “Carta della Natura” project (
the proposed National Programme for monitoring Natura 2000 sites (
relevant scientific literature (
Indicators were selected that were relatively easy to measure, not requiring too much expert knowledge and interpretation.
Data for survey were collected to calculate the 22 indicators listed below:
number and species of stems (stems ha-1), basal area (m2 ha-1), mean diameter and standard deviation of diameters (cm), number of big trees (diameter at breast height bigger than 50 cm);
dominant and mean height (m);
number and species of saplings (number of individuals lower than 10 cm in diameter ha-1);
crown coverage (%);
vertical and horizontal structure (qualitative groups);
volume and degree of decomposition both of fallen and standing dead wood more than 10 cm in diameter (m3 ha-1);
ground flora vegetation (number of species and percentage); a species identification and an estimate of their coverage were performed using Braun-Blanchet indices. A 20 by 20 m subplot in the Cansiglio Forest and a 10 by 10 m subplot in the New Forest were used for this indicator; the area of the subplot was determined from a species/area curve (
number and species of seedlings (number of individuals lower than 1.3 m in height). A 3.5 by 3.5 m subplot in Cansiglio Forest and a 10 by 10 m subplot in New Forest were used; subplot measures were derived from a number of individuals/area curve;
damage caused by wind, snow, forestry, deer, insects, fungi, fire were recorded only when affecting more than 10 % of the plot area.
The time required to collect data for the above indicators was recorded. The survey teams were usually composed of two people.
For each of the 30 selected units a north-orientated 100 m transect was also created (Fig. 3). The start-point was coincident with the south-west corner of the plot. When the transect was found to end in a different unit, an east-west transect was used instead.
Data were collected using a distance-based sampling method, combining the point centre quarter method (
With the transect-based method, only number of stems, species number and diameter at the breast height (dbh) were taken into consideration as indicators. As in the plot method, time to collect the data was recorded. The survey teams were usually composed of two people.
In order to answer the research questions the following statistical analyses were performed:
three paired-
a forth paired-
a correlation analysis between indicators considered in the plot method to examine relationships which could allow values from one indicator to be predicted from another, and thereby reducing the amount of field data to be collected.
To assess cost-effectiveness three paired-t tests were performed comparing: (i) time spent setting the plot and the transect up, (ii) time collecting data for the indicators in common between the two methods,
In the Cansiglio Forest it was found that:
the time spent to set-up the plot is longer than the time spent to set-up the transect; respectively 45 ± 1.8 mins and 24 ± 1.4 mins (
the same time is required to measure dbh in the two methods; 41 ± 3.3 mins in the plot, 47 ± 3.0 mins in the transect (
the time spent for the 22 diversity indicators considered in the plot is longer than the time spent for the indicators
Therefore, when considering the two methods in their entirety, the plot method requires more time (195 ± 7.6 mins) than the transect method (71 ± 3.8 mins,
In the New Forest it was similarly found that:
the time spent to set-up the plot is longer than the time spent to set-up the transect; respectively 37 ± 2.6 mins and 18 ± 1.0 mins (
the same time is required to measure dbh in the two methods; 59 ± 3.8 mins in the plot, 54 ± 2.7 mins in the transect (
the time spent to collect the data for all diversity indicators in the plot is longer than the time spent to collect indicators in the transect; respectively 108 ± 4.5 mins and 54 ± 2.7 mins (
Therefore, when considering the two methods in their entirety, the plot-based method requires more time (144 ± 6.2 mins) than the transect (71 ± 3.3 mins,
Given that in both study areas the two methods differed in the time required for the data to be collected, a paired-
In the Cansiglio Forest it was found that:
the same number of trees per ha was recorded using both methods; 342 ± 33 trees ha-1 in the plot; 313 ± 33 trees ha-1 in the transect (
the plot method gives us the same value of basal area per ha than the transect one; 35.2 ± 1.73 m2 ha-1 in the plot; 33.6 ± 2.33 m2 ha-1 in the transect (
In the New Forest it was similarly found that:
the same number of trees per ha in both methods; 256 ± 19 trees ha-1 in the plot; 237 ± 26 trees ha-1 in the transect (
the plot method gives the same value of basal area per ha than the transect; 33.7 ± 1.93 m2 ha-1 in the plot; 31.5 ± 2.56 m2 ha-1 in the transect (
A correlation analysis was performed between indicators considered in the survey plot in order to test the possibility of prioritizing some of them.
In the Cansiglio Forest some statistically significant relationships were found between:
the volume of fallen dead wood and the stems number and the basal area (respectively Pearson’s r = 0.524,
the decomposition of fallen dead wood and the basal area (Pearson’s r = -0.368,
the volume of standing dead wood and the stem number and basal area and the volume of fallen dead wood (respectively Spearman’s r = 0.419,
In the New Forest some statistically significant relationships were found between:
the volume of standing dead wood and basal area and the number of big trees (Spearman’s r = 0.533,
the degree of decomposition of standing dead wood and the basal area (Pearson’s r = 0.445,
The overall aim of this study was to define a cost-effective methodological framework based on indicators for biodiversity to monitoring and reporting on the conservation status of woodland units protected within Natura 2000 sites. Two monitoring methods were applied: (i) the plot based method in which data were collected for a core set of 22 indicators and (ii) the transect based method in which only 3 indicators were taken into consideration. Indicators focused on forest structure and stems composition in both methods, on saplings, herbal layer composition and dead wood only in the plot method.
Regarding the cost-effectiveness aspect of the two monitoring methods the study confirmed that in both study areas the plot-based method is less efficient in terms of time taken to collect the data (195 mins in the Cansiglio, 144 mins in the New Forest) than the transect method (71 mins in both areas -
Regarding the accuracy and consistency of data collected no difference in the number of stems (342 stems ha-1 in the Cansiglio, 256 stems ha-1 in the New Forest referring to the plot; 313 stems ha-1 in the Cansiglio, 237 stems ha-1 in the New Forest referring to the transect) and basal area (35.2 m2 ha-1 in the Cansiglio, 33.7 m2 ha-1 in the New Forest referring to the plot; 33.6 m2 ha-1 in the Cansiglio, 31.5 m2 ha-1 in the New Forest referring to the transect) were found using the two monitoring methods.
Considering both study areas, the correlation analysis found many significant relationships between indicators especially for those related to basal area and dead wood. In particular the volume of standing dead wood was positively correlated with basal area in both sites. However, more research needs to be done in order to prioritize cost effective indicators and reducing in this way field efforts.
Natura 2000 calls for a level of environmental protection and it requires environmental considerations to be integrated into other policies with a view to promoting sustainable development. This is especially important for forest ecosystems, as forest habitats and forest species will be included in the Natura 2000 network in over half of all sites. This means that more attention will have to be paid to integrating conservation objectives into forest management. A prerequisite to achieve this is effective and relevant monitoring through cost-effective indicators covering the different elements of biodiversity at the scale of forest management units. The DG Environment B2 (Nature and Biodiversity) stressed that: i) monitoring of habitats and species is an obligation under Article 11 of the Habitats Directive; ii) data eventually reported to the Commission needs to be comparable and compatible in order to allow for analysis at a European Union scale (
This work has been a contribution to the challenging task of monitoring implementation inNatura 2000 policy context. Two biodiversity monitoring methods within two Natura 2000sites have been compared. Results suggested that surveying a subset of indicators using transect methods may provide the most efficient way for environmental agencies, and any organisations dealing with the management of Natura 2000 forested sites of assessing the conservation status of forested habitats at a local scale. The proposed analysis does not pretend to be exhaustive and the need for further research is acknowledged.
Natura 2000 biodiversity monitoring issues could be greatly reduced in the future by:
the use of another monitoring scheme to find out if there are simpler ways of achieving the same conditions assessment, such as structured walks covering a larger area, in which a simple questionnaire is completed. A questionnaire based method should assist forest managers in evaluating conservation status in a less time-consuming way than the plot and the transect method; it should also involve less physical work and fewer specialist ecological skills. Application of this method is described by
a study to find out to what extent the practice of scoring indicators (
The work has been funded by Veneto Agricoltura (Veneto Region Agency for the Agricultural, Forestry and Agro-food sectors) and by the Italian Ing. Aldo Gini foundation. The Authors thanks Padua University and Bournemouth University for the use of their facilities and support.
Assessment units in The Cansiglio Forest. Data provided by
Assessment units in the New Forest. Data provided by English Nature © 1998-2005 English Nature - reproduced with permission.
Illustration of the 100 m transect which the sampling transect method is based upon.